4" OD X 24" Long

4" OD X 24" LongThis 4" OD carbon fiber straight tube is used in air intake systems. Weighs 35 40% less than aluminum, yet is just as strong. Very attractive appearance. Our carbon fiber is 3K carbon fiber embedded in clear epoxy (wet process) and polished. Each of the bundles you see in the item consists of 3000 tiny fibers of pure carbon. The weave is twill, which means the bundles going one direction are spaced slightly wider than the bundles going the other

Legs are 10" long

Recommended clamps are CT450

especially if you have had trouble with the hose coming off

This 45 degree silicone elbow is 2-3/4" ID on one end and 2-1/2" ID on the other and can be used anyplace you need a reducing 45-degree bend

Check it out here: CAC40B-400X7

Recommended clamps are 94100-0325 on the small end and 94100-0338 on the big end

This silicone hump hose fits on Dodge Rams with the Cummins Engine

About 1-1/2 inches on each end goes inside an intake hose (minimum 1 inch)

This 2-1/2" silicone coupler is 6 inches long

This reducing 45-degree intake elbow can be used any place where you are connecting a 6" OD tube and a 5" OD tube

This 4-1/2" ID high-temp silicone hump hose is useful in any application that requires a high heat resistance

This 45 degree silicone elbow is 4" ID on one end and 3" ID on the other and can be used anyplace you need a reducing 45-degree bend