3.5" to 3" ID

3.5" to 3" IDThis 45 degree silicone elbow is 3 1 2" ID on one end and 3" ID on the other and can be used anyplace you need a reducing 45 degree bend. Handles 350 F continuous and is perfect for intercooler aftercooler and turbocharger applications. Five ply reinforced silicone for high strength. We now recommend all silicone elbows be 5 ply or better. Thick 7 32" wall construction. Full 6" leg lengths. Recommended clamps are 94100 0338 on the small end and 94100

Recommended clamps are 94100-0388 on the small end and 94100-0438 on the big end

you need a truly heavy-duty clamp - and this is it

This 2-1/5" OD carbon fiber straight tube is used in air intake systems

Also looks nice as part of a custom cold-air-intake system

Recommended clamps are 94100-0338 on the small end and 94100-0350 on the big end

Recommended clamps are 94100-0288 on the small end and 94100-0338 on the big end

Recommended clamps are 94100-0238 on the small end and 94100-0262 on the big end

Fits most Ford throttle bodies and MAF's and adapts to 4" tubing

This 2-1/4" silicone coupler is 6 inches long

25" MAFs and throttle bodies

It's only disadvantage is the fact that it doesn't have the few degrees of flex that a hump hose has

This standard 3" 90-degree intake hose can be used where have two 3" OD tubes and you need to make a 90-degree bend