HyperBreak Springs (Pair)

HyperBreak Springs (Pair)Description A selection of custom springs designed to be used with the HyperBreak rear drop arms or OEM E36 E46 arms. The springs come coated with a vibrant blue paint. All springs have an inside diameter of 64mm and as such should fit most e36 46 coilover adjusters. Important information For off road use only Options 70mm tall (2. 75") 24k 64ID 70mm tall (2. 75") 32k 64ID 100mm tall (4") 16k 64ID 100mm tall (4") 24k 64ID 70mm The 70mm springs allow

The arms are stamped underneath with an L or and R to denote which side of the car they must be installed on

On the OEM arms the area between the spring and the hub hits the chassis of a low car

2x HyperBreak trailing arm brackets

On heavily lowered cars this reduces the angle that the driveshafts and control arms sit at helping to prolong the life of your driveshafts and give you better suspension geometry

This length adjustment gives the user more control over the toe and camber settings for the rear wheels or can be used to dial in wheel fitment

Uses high quality rod ends/rose joints

The overall length of the spring is also longer so it allows for more suspension travel than the 70mm springs

Please allow 3-5 weeks for the arms to be made

Raise the rear subframe by 13mm

The droplinks can be purchased separately if the user later decides they want to run an ARB

The OEM BMW rear upper control arms can become a limiting factor when trying to lower an E36 and still retain a good amount of suspension travel

The unique kinked shape of the HyperBreak BMW E36 Adjustable Rear Upper Arms allow for 80mm more suspension travel than the OEM arms before fouling on the chassis