A20093 1/10 On Road Soft Tread Car RC Wheels and Tyres 10 Spoke Black x 4

A20093 1/10 On Road Soft Tread Car RC Wheels and Tyres 10 Spoke Black x 4Tyres are not glued however include foam inserts. Gluing is recommended before use to prevent tyre shredding. To suit 1. 10 scales models however will not fit all brands. Please check measurements below to help ensure a fit. 12mm Drive Hex. 45mm Inner Diameter. 65mm Outer Diameter. 26. 2mm Wide. 13mm depth to hex.

Will not be suitable for other engines unless meets below requirements: Crankshaft output thread is 5mm in diameter (to accept 5mm thread flywheel axle)

If so then this can be customised to fit

C hex hub 12mm measured across the flats m12 socket

Will suit most models with a

Offset 19mm measured from the edge of the wheel to the edge of the hex

12mm Drive Hex

25mm distance from edge of wheel to edge of 12mm hex center

Made from plastic good quality wheels and rubber good grip tyres soft

To fit 12mm drive hexes

Great for use on custom builds best suited for 1/5 models not designed for a specific one

2) Put the fail safe connection lead into the servo port of the receiver (where the throttle servo lead usually goes)

Measures 27mm end to end (furthest) (measured on 1 arm end to end)