Nissan Navara D23 IV 4 (2014-2021) Additional Harness

Nissan Navara D23 IV 4 (2014-2021) Additional HarnessIf your Nissan Navara head unit looks like this in the rear, you need this harness for it to work. Please be aware, even with this type of harness, some of these models have an ACC wire that needs to be located and attached to G3 to make the unit turn on. NOTE: For vehicle OSD language once you set the canbus settings as below, go to the vehicle settings app and set the language. This setting will also sync the dashboard clock

NOTE: If you are vehicle has a factory 360 system - Set the canbus setting to this  high-lighted in red ONLY

LUXONE models need to add this harness

Before purchasing

Transmitter size: L 79mm*W29mm* H20mm

This service is not refundable

BE SURE to center the fade and balance on the OEM head unit before replacing with ours

You may need to cut the red-marked areas in our frame and/or into the dashboard panel if there is obstruction

Optical audio conversion box - Skoda Kodiaq Octavia 3 A7 / Volkswagen Tiguan 2 Mk Golf 7

You need to disconnect the G5 from the canbus and connect a wire from the reverse light to G5 for reverse detection

Connect your phone to the car via Bluetooth

check this harness and make the modification as per below by shifting 2 wires pointed out by the arrows to the 2 slots on the opposite side

Please Note: If your indication slots are identical to this