Mash Colander Stainless Steel Lifting Cables

Mash Colander Stainless Steel Lifting CablesThese stainless steel cables with quick connects attach to the Small, Medium and Large Mash Colander and a lifting hook for easily removing the Colander once mashing is complete. Please note: cables are rated for 200lb maximum load lift at slow lift speed (ie. <4m 12' per minute). They should not be used for any other use other than lifting the Large (or smaller) BREWHA Mash Colander. They should be strength tested before brewing use by lifting 1. 25

no loss of temperature in the lines or tap

33kW heaters plus 1hp pump

Its straightforward design improves process control and supports the production of consistently high-quality brews

The EPDM seal ensures a reliable

9psi inside the vessel and 7psi in the jacket of the 4-in-1

ETC tank temperature sensor and controller to monitor tank temperature to drive cooling pumps or close heater contacts or heating solenoids (if using tank for just cooling one or two are recommended to drive one or two water chillers)

5"TC on the hose side

all it takes is jiggling the valve a few times or repeating the steps a couple times before the hops all drop into the tank

and brewery liquids

Recipes and experience learned on a smaller sized system can be easily translated

5 BBL and larger tank lid ports

The tank’s dual jacket system can accommodate up to two brewery chillers for overnight chilling and rapid cooling between batches