T10062 1/8 RC Buggy M17 17mm Alloy Wheel Hubs Adapter Nut Pin Purple x 4

T10062 1/8 RC Buggy M17 17mm Alloy Wheel Hubs Adapter Nut Pin Purple x 4Set of 4 replacement wheel hubs to fit 1 8 scale models. This set includes hubs nuts and pins. This set does not use grub screws to secure the pins in place. When the wheel is over the hub the pin will be held in place. Inner diameter measures 8mm. Length of the hub 13. 3mm. 17mm hub measured across the flats. 12mm across the threads

30mm depth to hex

2 x blue gaskets

Measures 1000mm long

Designed by HSP

Center hole diameter is 5mm Wheel Hex M12 measures 12mm across flats Hub thickness: 4mm

If your rc car is over 2 years old you will need the larger pull starter which features a 32mm (top right to top left center screw hole) backplate with a 14mm hex

To ensure a fit check your wheel axle has a hole for a 2mm thick pin to go through it and the wheel axle shaft is 4mm in diameter

This is a direct roof mount so will need a few holes drilled for this to be placed

C0119A RC EC5 5

- Across the center of fixing holes top right to top left

Please check your manual to ensure you are ordering the correct part number as some parts are specific to the model number

12mm hex hub 56mm inner diameter (check the hub carrier is smaller than this) 84mm outer diameter