UNC 2 X 56 BaerCoil Inserts

UNC 2 X 56 BaerCoil InsertsBaerCoil Wire Thread Inserts Standard Stainless Steel (AISI 304), type: "free running" length measurement: 1,5 D means 1,5 times thread diameter equals thread lenght, e. g. UNC 1 4: 1,5 times 6,35 (1 4") = 9,525mm UNC Wire Thread Inserts Dimensions BaerCoil Instruction for use Technical Information BaerCoil: Thread Repair of damaged or worn out threads Recovery of rejected items Thread Armour Plating. For material with low shear strenght eg. aluminium

STI Bottoming Tap HSSG

5 D T (Length when installed) 9

Diameter 10 Length 2

331 '' P (depth) The thread insert must sit 1/4 - 1/2 turns below the surface B (thread depth with chamfer) 0

Then the BaerCoil® thread insert is screwed into the old thread and thus the workpieces are screwed back together

25 thread inserts is also called STI thread (screw thread insert) or STI thread (in English Screw Thread Insert) and has an oversize so that the normal starting thread MF 10 x 1

1 x B3075-1: BaerCoil HSSG single-cut tap M 11 x 1

5 times 11

DIN 345 right

The BaerCoil® thread insert is the perfect solution for damaged threads without changing the nominal diameter

1 x EBW05: BaerCoil installation tool M 5 x 0

Cast steel 1