HyperBreak BMW E36 Rear Subframe Riser Bushings

HyperBreak BMW E36 Rear Subframe Riser BushingsFeatures Raise the rear subframe by 13mm Made from solid aluminium Black anodised coating Tapered to ease installation Important information For off road use only Description The HyperBreak E36 rear Subframe riser bushings raise your rear subframe by 13mm (the max it can be raised without modification). On heavily lowered cars this reduces the angle that the driveshafts and control arms sit at helping to prolong the life of your driveshafts and give

The arms are stamped underneath with an L or and R to denote which side of the car they must be installed on

In OEM arms they are too short and will barely even begin to compress before the arm bottoms out on the chassis

100mm tall (4") - 24k - 64ID

The 70mm springs allow for an extremely low ride height and can only be used with HyperBreak rear drop arms

5 length adjustment settings: -7

Important information

Length adjustment: +18mm to -18mm

Please allow 3-5 weeks for the arms to be made

The arms can be provided in either a gold zinc plating (pictured) or in raw steel if you would like to paint/coat them yourself

9 grade bolts and lock nuts

The OEM BMW rear upper control arms can become a limiting factor when trying to lower an E36 and still retain a good amount of suspension travel

Black anodised coating