7/8"-14 UNF Carbon Steel Bottoming Tap

7/8"-14 UNF Carbon Steel Bottoming TapProduct Description Carbon steel taps are used to re thread damaged and or jammed threads. They may also be used to thread mild steels. Hand Taps come in three styles Taper, Plug or Bottoming. Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole. A tap set contains 1 taper, 1 plug and 1 bottoming tap. Brand Drill America Part Number DWTB7 8 14

Part Number: 50X350DPAPL

25x20 Round Button Head Socket Screw Off Road Moto Hardware Zinc - 2PCS

Diameter: M12-1

but not brittle

Part Number: M20X100DPOSAPL

Alloy Button Socket Head Cap Screws

and steel wire • Lower jaws exert nearly 30% more force than main jaws for closing wire clamps and crimping connectors • Cutting Capacity for Low Carbon Steel Wire: 5 AWG

angled end

Width: 20-1/2"

Each Tekton combination wrench is permanently marked with a stamped size marking on both sides for easy identification

Part Number DEWCBRTS2INCH

Diameter: M20