TeSys K contactor - 3P - AC-3 <= 440 V 9 A - 1 NO aux. - 380...400 V AC coil

TeSys K contactor - 3P - AC-3 <= 440 V 9 A - 1 NO aux. - 380...400 V AC coilTeSys K contactor, 3 poles (3NO), for motor control applications up to 9A 690V AC 3 (4kW@400V), and for non inductive load control applications up to 20A 690V AC 1. It provides a 380 400V 50 60Hz AC coil, 1NO built in auxiliary contact, connection by screw clamp terminals. For operating rates until 600 cycles hour and environments until 50C, it procures reliability and durability to standard applications. Very compact (45mm width), DIN rail mounting

in a switchboard or wall-mounted

271mm deep

It provides 230V 50/60Hz AC coils

This assembly is made of 2 adaptation fixtures mounted on the right side of each device and a set of cables with no-slip adjustments

They enable connection of one to four cables with crimp lugs up to 300mm²

It is designed to be mounted in vertical position (+/- 10 °) on a panel

It is provided with RC protection limiting the transient voltage to 3Uc max

220VAC to 240VAC

and an extension shaft to be be adjusted in length (distance between the door and the back of the circuit breaker must be in range 189-300mm)

It has 3P with 3 protected poles

401mm deep

It is suitable for motors with power rating up to 5