Dry Hop Sight Glass Assembly

Dry Hop Sight Glass AssemblyThis assembly make it easy to purge air from hop pellets prior to dry hopping. If fermentation gas has been captured and the tank is under pressure simply put hops in the sight glass, crack the butterfly valve to bleed CO2 through the hops to purge them of air, and release the gas through the top release valve. Then open the butterfly valve wide so the hop pellets drop into the tank. Close the butterfly valve and repeat for multiple additions. (If

6°C/33°F – 60°C/140°F

Oxygen will pass through the 2 micron pores and diffuse into the wort

tank heating can alternatively have power controlled by the brewery Touchscreen Brewing Power Controllers which are features an in-built touchscreen controller thermostat

uncoiled manner

Article: How to use distiller's carbon to clean up liquor

Patco 376 or Atmos 300k)

and can be sparged as it is withdrawn from the BIAC fermenter

It is not a complete pump assembly

For deeper immersion

while the 228-plate model provides more heat-transfer area for larger or higher-flow processes

overtime beer stone can build up that needs to be removed with an acidic wash

Max pre-boil volume 80L/20gal