Wilwood Rotor-SV-SRP72 Iron-RH-Drill-BLK 14.00 x 1.25 - 12 on 8.25in

Wilwood Rotor-SV-SRP72 Iron-RH-Drill-BLK 14.00 x 1.25 - 12 on 8.25inSRP Drilled Performance Rotors feature a specially engineered directional cross drill and face slot pattern that improve brake response and pad performance throughout the entire range of light to heavy braking. The venting and cleaning action of the holes and slots will reduce pad glaze and disperse gasses and heat generated during the pad to rotor interface. The holes and slots also inhibit irregular pad compound build up on the rotor faces resulting

P2M top feed billet aluminum fuel rail kit for S13 SR20DET motor

It can be held open with a solenoid to aid turbo response and control during staging to give the best possible launch for drag racing

The result is a pair of sleek canards that provide efficient aerodynamic deflection and create downforce while the thin design looks perfect on the BMW chassis and giving a net benefit of reduced drag by redirecting air away from larger tires and wheel arches

wire-impregnated silicone

Uses a cost effective factory LS 4L60e bellhousing (roughly 1/10th the cost of a T56 bellhousing)

Koyo 13-17 Ford Focus ST 2

The K20C1 is quite the powerhouse in the Civic

Pliable polyurethane bump seal insures tight

1 x 6 bolt pattern aluminum mounting bracket

Designed for GM LS Gen III and IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads

most easiest way to save the weight of the car

Two 5/8"-18 Left hand male threaded bushings with a 14mm hole for the Traction rods