PSM FC Sub Frame Camber Arm

PSM FC Sub Frame Camber ArmScarles is the home of Parts shop max in NZ and Australia Check out the full range on their website https: store. partsshopmax. com Listing is for: 1x Camber Arm ~ Mounts vertically near differential ~ Adjustable length will tilt rear subframe to change camber setting. ~ Only one arm is required per car ~ Steel Turnbuckle with Copper Metallic Paint ~ Steel bearing side spacers with Gold Finish ~ CrMo Teflon lined rod ends ** If using with solid

8ft 8mm quick connect hose

Finished in gold powdercoat and laser logos

Pair this with our C5 lines and fittings set if you choose the in-line master for single rear calipers

Bolts on in place of the dust shield

Delivered untreated and ready to be applied

The new standard establishes the requirements for design and performance in terms of increased protection against flames and against heat transmission

Select the BOV spring pressure rating based on your engines vacuum reading at idle when the engine is at operating temperature

2) Fully threaded damper & lower mount allows vehicle height to be adjusted independent of the spring preload and without using a helper spring

Parts Shop Max GOLD Spline Drive Racing Lug Nuts 12x1

~ Rear lower control arm adjusts camber

These bushings raise the subframe upwards to help correct the axle angle and trailing arm angle on lowered cars

Dynamic toe control requires our clevis based complete toe rod