58300A 1/10 Scale RC Alloy Shock Absorbers Damper Set x 2 Gold 100mm Long

58300A 1/10 Scale RC Alloy Shock Absorbers Damper Set x 2 Gold 100mm LongIncludes 2 sets of springs which are blue and red. Blue are stiff and red are soft. Also included are four washers and replacement swivel balls and a couple of screws. To help ensure a fit please check measurements below. Measures 100mm long between center of fixing holes. Total length end to end 107mm. Diameter 18. 10mm at the widest point. To suit 3mm screws on the bottom and 4mm on the top.

To suit HSP 1/10 cars and buggies scale models

Same material as most of body shells made from

This is a pre-painted body shell but requires cutting and drilling

To suit 1/10 scale wheels with the following measurements

4ghz) which must be running an esc or have a 6v DC input if using two servos for nitro models

Gluing is recommended before use

Total length end to end 98mm

5mm outer diameter

Inner diameter 1

Pin measures 2mm diameter x 18mm long

Note: This shell is narrow and may not fit a lot of nitro models electric models ideal

Then the wheel goes on top of this and then wheel nut etc