1670m2 Clearwater Bypass Separator | NSBP003

1670m2 Clearwater Bypass Separator | NSBP003The Clearwater NSBP003 Bypass Separator is for areas up to 1,670 sq m. This range of Bypass separators from Clearwater, provide the ideal solution for low risk floods when there is little possibility of a combined heavy rainfall and large spillage. Bypass separators are used when it is considered an acceptable risk not to provide full treatment, for very high flows, and are used, for example, where the risk of a large spillage and heavy rainfall

The standard width (45x75mm) locking bush/element can be purchased with the BF Bottom sprocket to lock the sprocket onto the shaft

The Studor Maxi-Filtra is packaged in a resilient exterior for longevity outside

Explosion Protection: [Ex ia] IIC (–20°C ≤ Ta ≤ +50°C)

If you have a septic tank that discharges directly to a surface water you will need to replace or upgrade your treatment system by January 1

Supply: 230V/50Hz/1PH

cheaper off-mains installations

This assembly can also be fitted to older Klargester BioDisc treatment plants when purchased with a retro fit kit – please call for more information on 01388 537 050

Specification:

Weight - Full (kg): 1860 Shipping Height (mm): 1570 Fall Across Unit (mm): 70  Clearwater NSG04 Features and Benefits

The active carbon filter within the ByStudor Maxi-Filtra operates as a two-way vent

The Klargester (Kingspan) BC BioDisc drive end bearing is suitable for all Klargester BC BioDisc Sewage Treatment Systems and is a complete nylon bearing with grey bush insert

The turning on and off of the pump is automatical controlled by the float switch when the water level rises and lowers